Оптический датчик SICK WL9LGC-3P2452A00, артикул 1080952

Оптический датчик SICK WL9LGC-3P2452A00, артикул 1080952.

Расстояние срабатывания: 0 m ... 2.2 m 1) 2) [примечание 1]. Напряжение питания: 10 V DC ... 30 V DC 1) [примечание 2]. Коммутационный выход: PNP 4) 5) [примечание 2]. Функция выхода: Комплементарный. Интерфейс связи: IO-Link.

Семейство: W9. При подборе сверяйте артикул 1080952 и полное обозначение WL9LGC-3P2452A00.

Примечания к параметрам (EN)

1. 1) Reflective tape REF-AC1000. 2) To ensure reliable operation, we recommend using REF-AC1000 reflective tape or reflective-tap reflectors such as P41F, PLV14-A, PLH25-M12, or PLH25-D12. Reflectors with large-scale triple structures must only be used if deemed suitable for the application. 3) Average service life: 50,000 h at T U = +25 °C. 4) Do not intentionally look into the laser beam. Never point the laser beam at people's eyes.

2. 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not fall below or exceed U V tolerances. 3) Without load. 4) Q = light switching. 5) Pin 4: This switching output must not be connected to another output. 6) Signal transit time with resistive load. 7) Valid for Q \ on Pin2, if configured with software. 8) With light/dark ratio 1:1. 9) With light / dark ratio 1:1, valid for Q \ on Pin2, if configured with software. 10) A = V S connections reverse-polarity protected. 11) B = inputs and output reverse-polarity protected. 12) C = interference suppression. 13) As of T a = 50 °C, a max. supply voltage V max. = 24 V and a max. load current I max. = 50 mA is permitted. 14) Operation below Tu –10 °C is possible if the sensor is already switched on at Tu > –10 °C, then cools down, and the supply voltage is subsequently not switched off. Switching on below Tu –10 °C is not permissible.